How To Program Chevy Key.

Hi this is a post from cheap locksmith houston to help our customers to save some money on the simple stuff. Today we will explain how to program chevy key cheap.

This procedure is called on board programing and applies for most of the chevy car key. So how to program chevy key? This is a 30 minutes procedure that requires some attention.

How To Program Chevy Key part 1:

After you get the newly cut key you can start the how to program chevy key by driving the new key into the ignition lock and turning it into the on (run) position. The security light on the dashboard will stay on for 10 minutes.

How To Program Chevy Key Part 2:

Within 55 seconds after the security light goes off turn the ignition key into the off position and back to the on (run) position. The security light will appear again and you will leave it for another 10 minutes. (DO NOT REMOVE THE KEY FROM THE IGNITION CYLINDER OR YOU WILL HAVE TO START THE PROCEDURE AGAIN).

How To Program Chevy Key Part 3:

Again after 55 seconds the security light goes off and we will turn the ignition key to the off position. After about 4-5 seconds we will turn the ignition key into the on position again living it for 10 minutes.

How To Program Chevy Key Finish:

When the security light goes off for the third time turn the key into off position and into on position after 5 seconds. The key is programed now and you can start your vehicle.

Good Luck To You! If you feel you need professional help you can give us a call. We will be more than happy to help you our valued customer. We have techs on stand by for all your car programing needs. Call Us Now. (713) 322-0009.